SKU BMW-No. |
Image | Product name Product description |
Price |
---|---|---|---|
0-0004
|
![]() |
Crankshaft with connecting rod, for piston pin diameter 18mm, bolt diameter 30/25mm, bolt length 56 mm, other hand bolt diameter 30/20/15mm, bolt length 118mm, from BMW motorcycle program, defective spare part, unrepaired, as dismounted, provided for general overhaul in a qualified company. |
80.00 € per piece |
0-0005
|
![]() |
Crankshaft with connecting rod, for piston pin diameter 20mm, bolt diameter 35/30mm, bolt length 57mm, other hand bolt diameter 30/20/15mm, bolt length 118mm, from BMW motorcycle program, defective spare part, unrepaired, as dismounted, provided for general overhaul in a qualified company. |
80.00 € per piece |
0-0006
|
![]() |
Fuel filter make KARCO |
19.90 € per piece |
1-0010
11110001053 |
![]() More pictures |
Crankcase with studs, used, no guarantee Fits the BMW Isetta 250 und 300 ccm |
145.91 € per piece |
1-00100
11110001110 |
Crankcase with studs, used M6x5 mm long, for oil pipe |
1.20 € per piece |
|
1-0011
11110001053 |
![]() More pictures |
Crankcase with studs Original BMW replacement part, not an industrial Crankcase (Industriemotorgehäuse), used, cleaned, degreased, glass bead blasted and polished. All plummer blocks, screw threads and tapped holes have been professionally inspected. Well suited for new motor rebuild. Fits the BMW Isetta 250 und 300 ccm. |
269.00 € per piece |
1-0012
11110001053 |
![]() More pictures |
Crankcase with studs Original BMW Isetta replacement part, not an industrial crankcase, gebraucht, gereinigt, entfettet und glasperlengestrahlt. Anschließend aufwendig von strahlresten gesäubert. Alle Lagersitze, Gewinde und Gewindebohrungen wurden fachmännisch geprüft. -hervorragend geeignet für einen Motor Neuaufbau.- passend für BMW Isetta 250 und 300 ccm |
269.00 € per piece |
1-0013
|
![]() More pictures |
Engine 250ccm, original BMW Isetta, overhauld, test run This engine was built with new spare parts by a master mechanic. Zolltarifnummer: 84073320 |
1795.26 € per piece |
1-0014
|
![]() More pictures |
Engine 300ccm, original BMW Isetta, overhauld, test run This engine was built with new spare parts by a master mechanic. customs tariff number: 84073320 |
1938.88 € per piece |
1-0015
|
![]() More pictures |
Engine former German Army equipment, new, 300 ccm suitable for BMW Isetta |
1290.00 € per piece |
1-0017
|
![]() More pictures |
Used engine for BMW-Isetta 250 ccm, removal was not supervised, with various built-in or missing parts, price on request (250,00-400€ Euro) |
250.00 € per piece |
1-00175
|
![]() More pictures |
Engine used for BMW-Isetta 250 ccm, unchecked as removed, If you need pictures and/or a price please contact us by E-mail |
250.00 € per piece |
1-0018
|
![]() More pictures |
Engine used for BMW-Isetta 300 ccm, unchecked as removed, with built- or rather missing parts, Price on request from 550,00 Euro |
549.99 € per piece |
1-00185
|
![]() More pictures |
Engine used for BMW-Isetta 300 ccm, unchecked as removed, not complete Picture and Price on request |
450.00 € per piece |
1-0019
|
![]() More pictures |
Sub frame for Isetta engine, for stable stocking |
64.90 € per piece |
1-002
11110001112 |
![]() |
Bearing bush for oil pump |
7.29 € per piece |
1-003
11410052110 |
![]() More pictures |
Plug screw for oil pump drive on engine housing, upper |
8.10 € per piece |
1-004
07119903416 |
![]() |
Stud M 10x 22 mm -8.8, for cylinder attachment |
1.54 € per piece |
1-005
07119903339 |
![]() More pictures |
Stud
M 8 x 30 mm -8.8, galvanised, for gear box attachment, lower M 8x30 mm -8.8, für Getriebebefestigung, unten |
1.20 € per piece |
1-006
07119903348 |
![]() More pictures |
Stud M 8 x 35 mm -8.8, galvanised, for gear box attachment, upper |
1.50 € per piece |
1-007
07119903185 |
![]() |
Stud M 6 x 15 mm -8.8, galvanised, for chain housing cover |
1.23 € per piece |
1-008
11110001120 |
![]() |
Shaft seal 52x72x10 silicon, left hand twist for flywheel packing , inventory record keeping under 98-069 |
10.81 € per piece |
1-0080
|
![]() More pictures |
repair bushing for the running field about the shaft seal on the flywheel 1-185 / 1-008 |
39.90 € per piece |
1-009
11140001506 |
![]() |
Shaft seal 25x37x7, for front crankshaft pivot, inventory record keeping under 98-015 |
3.20 € per piece |
1-010
11110001106 |
![]() |
Plug for timing setting |
1.30 € per piece |
You can print our complete product list if you like. Please note that the printout may become quite long – depending on the product group.
The attached documents (exploded drawings, mounting guidelines, etc.) give you assistance for the usage of parts or some extra tips for special products: