SKU BMW-No. |
Image | Product name Product description |
Price |
---|---|---|---|
4-069
07119900075 |
Cylinderhead screw DIN 84, M5 x 16, V2A steel |
0.10 € per piece |
|
7-000
61128070530 |
Ground strap or 5-0071 baugleich mit 5-0071 |
3.70 € per piece |
|
7-0020
12318002505 |
More pictures |
Motor generator complete, without rotor: it is a replacement article of make Bosch. Because of the long storage time, the motor generator is repaired in a professional garage. Function of starter motor and the loading performace are checked with the standard of the producer |
354.00 € per piece |
7-0021
12318002505 |
More pictures |
Amature for motor generator.It is a replacement article of make Bosch. Because of the long storage time, the amature is checked in a professional garage. The collector is dressed to size and checked static and dynamic with the standard of the producer. |
318.00 € per piece |
7-002100
12318002505 |
More pictures |
Rotor for motor generator. without Stator. It is a used part original Bosch. The amature is checked in a professional garage. The collector is dressed to size and checked static and dynamic with the standard of the producer. |
318.00 € per piece |
7-00211
12318002505 |
More pictures |
Stator for Dynastart, without rotor, expertly reconditioned with new brushes and new Bosch breaker contacts. All cables and wires were replaced as necessary. The collector of the rotor was turned off when needed, trimmed and then the system was tested statically and dynamically, for 100% functionality. |
354.00 € per piece |
7-0022
12318003507 |
Plate for brush holder left |
9.85 € per piece |
|
7-00220
12318003507 |
brush holde without plate, left |
4.90 € per piece |
|
7-0023
12318003506 |
More pictures |
Plate for brush holder right |
5.90 € per piece |
7-00230
12318003506 |
brush holder without plate, right |
2.00 € per piece |
|
7-0024
12318003505 |
Brush holder plate with two brush holders |
6.95 € per piece |
|
7-003
12318002505 |
Cable for deadlock of motor generator, 6qmm, yellow, with cable lug, 185mm |
1.50 € per piece |
|
7-0030
12318002505 |
Cable for deadlock of motor generator, 0,75qmm, yellow, 90mm |
0.90 € per piece |
|
7-004
12118002521 |
Centrifugal governor reconditioned , professional rebuilt, the centrifugal governor was set to an optimal ignition timing on a test engine. |
59.90 € per piece |
|
7-00400
12118002521 |
More pictures |
base for governor |
8.50 € per piece |
7-0041
12118003085 |
Spring for centrifugal governor 5.0 mm diameter, also B6-08-00460 and B7-18-0512 |
2.40 € per piece |
|
7-00410
12118003083 |
Spring for centrifugal governor 4.5 mm diameter, also B6-08-00461 and B7-18-05120 |
2.40 € per piece |
|
7-0042
12418003759 |
retainer lock washerfor holding of the extension spool at centifugal governor |
2.50 € per piece |
|
7-0043
12118002521 |
holder for pull-spring at the governor |
2.00 € per piece |
|
7-0044
12118002521 |
bolt average 4,00mm/2,00mm, lenght 9mm, with snap ring nut, repair parts for governor |
0.50 € per piece |
|
7-0045
12118002521 |
bolt average 4,00mm/3,00mm, lenght 8mm, with snap ring nut, repair parts for governor |
0.50 € per piece |
|
7-0046
12118002521 |
bolt average 4,50mm/2,00mm, lenght 10,5mm, repair parts for governor |
0.50 € per piece |
|
7-0047
12118002521 |
adjusting lever lenght ca. 30,3mm, with locating hole 4,5mm, thickness ca. 3,8mm |
4.00 € per piece |
|
7-00470
12118002521 |
More pictures |
adjusting lever lenght ca. 34,6mm, with locating hole 4,5mm, thickness ca. 3,5mm |
4.00 € per piece |
7-00471
12118002521 |
adjusting lever lenght ca. 34,6mm, with locating hole 4,5mm, thickness ca. 3,5mm, with a forked arm |
4.00 € per piece |
You can print our complete product list if you like. Please note that the printout may become quite long – depending on the product group.
The attached documents (exploded drawings, mounting guidelines, etc.) give you assistance for the usage of parts or some extra tips for special products: